Imagine yourself under the showerl’water which rises slowly jammed lo I unload from the basin. If you find yourself in this situation, don’t worry!
In this article, I’ll walk you through 5 steps to to unlock the bathtub drain and fix the problem of the this emptying.
With simple remedies do-it-yourselfyou will soon be able to enjoy a relaxing shower without any problems drainage. We are ready? Here’s what to do.
There are few things less appealing than unclogging a bathtub drain, but calling a hydraulic it can be expensive and time consuming. If you’re short on both, it can be helpful wear rubber gloves e face the problem alone.
Locate visible obstructions
In many cases, the block it can be on the surface and easily removed. Often, the culprits are hair that accumulate in cork of exhaust.
If your tub has a chain stopper traditional, it will be easier to access the drain. However, for modern bathtubs with an integrated stopper, it may be necessary to remove the stopper to have a better access.
Once removed, use a torch to check for visible obstructions. Use the ditafrom the pliers o one wire hook to extract any blocks.
Use boiling water
Assuming there is no standing water in the tank, a simple and effective method is to pour boiling water in the exhaust.
Hot water can dissolve residues grasso e soap which may have caused the blockage. Pour about a gallon of boiling water down the drain and see if the water starts to go down faster. If necessary, repeat the operation a second time.
Use a drain cleaner
Before using one plungerit is essential to plug the overfull of the tub to create the necessary empty. Use one tore up wet to plug the overflow hole.
Then, fill the tub with a few inches of water. Place the plunger over the drain and pump it up and down several times, watching to see if the water starts to come down. Repeat the operation until the block is removed.
Try baking soda and vinegar
Another effective home method is to use sodium bicarbonate e vinegar. Pour a cup of baking soda down the drain and leave for 15 minutes, then add a cup of white vinegar.
The chemical reaction that results creates a foam powerful that could break down blockages and neutralize unpleasant odors. Once the reaction is finished, rinse with water.
Note: If you have pipes in metal, vinegar can speed up the corrosion. In this case, it is better to avoid this method.
Invest in a plumbing snake
If the blockage persists, it may be time to use a plumbing snake. This instrument It’s perfect for reaching and removing obstructions located deeper in the pipes.
A metal plumbing snake approximately 10 feet long is easily usable and extremely effective. Just pop it into the drain and do it rotate as it penetrates the pipes to remove the blockage.
These simple steps should help you resolve most cases of slow drain or blocked. If after trying all of these methods the water still isn’t draining properly, you may need to call a professional.